Industrial tablet PC failure Common reason and targeted solutions

Industrial tablet PCs encounter various failures during operations. Some main faults as below :

First of all, there are many dust particles in the air

When manufacture, most of the raw materials need to be processed with tiny particles. Over time, large amounts of dust or tiny particles can easily accumulate in the tablet, resulting in reduced heat dissipation from the tablet, high internal temperature and hardware damage. This situation mainly occurs around the cooling fan, such as the central processing unit, power supply, hard disk, graphics card, and so on.

Solution: regularly to clean the dust. In dusty areas, a dust filter can be placed in the ventilated area of the tablet chassis. The most important and easiest way is to “bath” the tablet regularly.

Second, the vibrations in the working environment are relatively large

Through the motherboard component serpentine design, the length of the wire between the memory slot and the CPU is the same, resulting in better DDR4, overclocking range and overclocking stability. Industrial computer motherboards start faster, overclocking more, and the system is more stable after overclocking.It reserves the stream chip, eliminates current noise and provides pure sound, and the industrial computer motherboard’s audio protection line area is separated from  

Third, the voltage fluctuates greatly

Some relatively remote areas are prone to power shortages and voltage instability, causing the tablet to restart frequently, and important system files are easily lost, preventing normal operation.

Solution: The stability of the power supply in the working environment is very important and requires the protection of a regulated power supply and an uninterrupted power supply.

Fourth, the humidity is too large or too small

Industrial tablet PC are made up of various electronic components. Excessive humidity can cause short circuit and burnout of the board. Too low humidity is prone to static electricity and damage to electronic components.

Solution: Keep the workshop humidity above RH60%

Fifth, the ambient temperature is too high

Tablets are sensitive to ambient temperatures. In the hot summer, tablets can easily “crash” and can cause serious hardware damage.

Solution: Reduce the ambient temperature of your tablet and ensure that your tablet is functioning properly.

It’s just some part of the problems that are common in the use of industrial tablet PC. If you are experiencing problems with damage and parts damage, you will need to find a manufacturer for after-sales maintenance, or you can contact us info@evrtech.com for some answers