Project Description
PI37B
◆ Onboard N3160,N3710 processor；
◆ Onboard 2G\4G memory；
◆ Onboard 16/32/64/128G EMMC (optional) ；
◆ 6 RS-232 or 4 RS232, 2 RS422/RS485 (alternative)；
◆ Provide 1*VGA, 1*HDMI；
◆ DC12V power supply；
◆Structure 170*170mm ；
Product Specifications
| Processor | CPU | onboard N3160,N3710 processor |
| CPU Package | BGA | |
| Chipset | Intel Braswell single chip | |
| BIOS | EFI BIOS | |
| Ram | Technical architecture | Single Channel DDR3 1066/1333MHz |
| Capacity | Integrated 2GB\4GB DDR3 | |
| RAM Socket | 1 slot can be added, maximum 8GB memory expansion | |
| Video | Graphic controller | Intel HD Graphics |
| VGA | VGA supports a maximum resolution of 2048×1536 | |
| HDMI | The maximum resolution supports 2560×1600 | |
| Double display support | VGA+HDMI dual display support synchronous and asynchronous | |
| I/O Panel | Ports | 1*VGA 1*HDMI 4*USB2.0 2*USB3.0 6*COM口 2*RJ45 network card 1*LINE OUT 1*MIC IN 1*DC interface 1*Quick switch button with indicator light 1*Hard disk indicator light 1*Power indicator light 1*Reset button |
| Network | Controller | 2 RTL8111E Gigabit Ethernet |
| Audio | Controller | Rui Qi HD ALC662 audio decoding (left and right channels + microphone) |
| Super I/O | Controller | IT8786E |
| Hardware Monitor | Watchdog-Timer | 0-255 seconds, providing watchdog routines |
| Cooler | The default is no fan (optional fan) | |
| Input/Output interfaces | USB | 5*USB2.0, 2*USB3.0 maximum support +5V/1A |
| Serial port | 6*RS-232 or 4*RS232, 2*RS422/RS485 (alternative) | |
| PS/2 | 1*PS/2 Pin interface | |
| GPIO | 8-bit, Sample Routine, Freely Defined Input/Output, 3.3V @ 24mA Level | |
| Expansion bus | Mini-PCle | 1*Mini-PCIe slot supporting PCIe and USB devices |
| Storage | SATA | 1*standard SATAIII interface, maximum transfer rate 6Gb/s (and SATA_HDD interface select one) |
| M-SATA | 1*M-SATA Scoket, support SANDISK protocol, maximum transmission rate 6gb/s | |
| SATA_HDD | 1*SATA_HDD interface (and SATA interface select one) | |
| NGFF | 1*NGFF interface (support WIFI and 3G/4G module) | |
| Power supply | Power Type | DC12V power supply |
| Power Consumption | 20W | |
| Working environment | Working Temperature | -20℃ ~ +60℃ |
| Storage Temperature | -40℃ ~ +85℃ | |
| Operating Humidity | 0% ~ 90% (non-condensing) | |
| Storage Humidity | 0% ~ 90%(non-condensing) | |
| Dimensions | Size | 170*170 mm |
| Weight | 0.5KG |
